Consumer
24V 10Ah LFP Pack
RVB-STF-RB-24010-X
A simple pack for consumer robots, with epoxy board housing and PVC wrapped. Versatile in application with a long service life, BMS included for safety protections.
- Nominal voltage
- 25.6 V
- Nominal capacity
- 10 Ah
- Nominal energy
- 256 Wh
- Continuous discharge
- 20 A
- BMS / comms
- Protection board only
Typical applications
- Service and hospitality robots
- Cleaning robots
- Desktop and lab automation
- Compact indoor platforms
Full specifications
Nominal values at 25°C unless noted.
Electrical Parameters
- Cell Configuration
- 8S2P
- Cell Chemistry
- LiFePO₄ (LFP)
- Nominal Voltage
- 25.6 V
- Nominal Capacity
- 10 Ah0.5C, 25 °C
- Nominal Energy
- 256 Wh
- Charge Cut-off Voltage
- 28.8 V
- Discharge Cut-off Voltage
- 20.0 V
- Cycle Life
- ≥ 3,000 cycles0.5C/0.5C, to 80% of rated capacity
Operating Conditions
- Max Continuous Discharge Current
- 20 A (2C)
- Max Peak Discharge Current
- 30 A≤ 10 s
- Max Continuous Charge Current
- 10 A (1C, 20–45 °C)
- Standard Charge Method
- CC/CV5 A / 28.4 V
- Discharge Temperature
- −20 to 60 °C (−4 to 140 °F)
- Charge Temperature
- 0 to 55 °C (32 to 131 °F)
- Long-term Storage
- 0 to 25 °C (32 to 77 °F)At 30–50% charge; recharge every 3 months
Dimensions & Weight
- Length
- 121.3 mm
- Width
- 115.5 mm
- Height
- 76.5 mm
- Weight
- 1,825 g (4.0 lb)
- IP Rating
- IP54
- Housing Material
- Epoxy board + black shrink wrap
Protections & Connections
- BMS / Communication Interface
- Protection board (PCM)No communication
- Protection Functions
- Over/under-voltage, charge and discharge over-current, short circuit, charge and discharge over/under‑temperature, fuse
- Cell Balancing
- Passive, 80 mA
- Terminals
- XT60 on 5 cm lead
Documentation
- Datasheet
- Available on request
Not sure which pack fits?
Contact us if you have any questions about which standard pack would be the best fit for your application.