Consumer
24V 10Ah NMC Pack
RVB-STN-RB-24010-X
A simple pack for consumer robots, with epoxy board housing and PVC wrapped. Versatile in application with a compact form factor, BMS included for safety protections.
- Nominal voltage
- 25.2 V
- Nominal capacity
- 10 Ah
- Nominal energy
- 252 Wh
- Continuous discharge
- 20 A
- BMS / comms
- Protection board only
Typical applications
- Service and hospitality robots
- Cleaning robots
- Desktop and lab automation
- Compact indoor platforms
Full specifications
Nominal values at 25°C unless noted.
Electrical Parameters
- Cell Configuration
- 7S2P
- Cell Chemistry
- NMC (Li-ion)
- Nominal Voltage
- 25.2 V
- Nominal Capacity
- 10 Ah0.2C, 25 °C
- Nominal Energy
- 252 Wh
- Charge Cut-off Voltage
- 29.4 V
- Discharge Cut-off Voltage
- 17.5 V
- Cycle Life
- ≥ 1,000 cycles0.5C/1C, to 70% of rated capacity
Operating Conditions
- Max Continuous Discharge Current
- 20 A (2C)
- Max Peak Discharge Current
- 50 A≤ 10 s
- Max Continuous Charge Current
- 15 A (1.5C)
- Standard Charge Method
- CC/CV5 A / 29.4 V
- Discharge Temperature
- −20 to 60 °C (−4 to 140 °F)
- Charge Temperature
- 0 to 45 °C (32 to 113 °F)
- Long-term Storage
- 0 to 25 °C (32 to 77 °F)At 30–50% charge; recharge every 3 months
Dimensions & Weight
- Length
- 100.6 mm
- Width
- 94.8 mm
- Height
- 75.1 mm
- Weight
- 1,090 g (2.4 lb)
- IP Rating
- IP54
- Housing Material
- Epoxy board + black shrink wrap
Protections & Connections
- BMS / Communication Interface
- Protection board (PCM)No communication
- Protection Functions
- Over/under-voltage, charge and discharge over-current, short circuit, charge and discharge over/under‑temperature, fuse
- Cell Balancing
- Passive, 80 mA
- Terminals
- XT60 on 5 cm lead
Documentation
- Datasheet
- Available on request
Not sure which pack fits?
Contact us if you have any questions about which standard pack would be the best fit for your application.